SPEED HAWK 750-Nc Machine Tool - Greatoo Intelligent Equipment Inc.

SPEED HAWK 750

Product Features：

Each axle stroke: X/Y/Z 650/1100/500 mm
Table size:X/Y 850/1300 mm
Spacious working area, perfect quality of work piece, the latest high speed spindle

Product Application：

Innovative HAWK SPEED 750 models set the three axis and five axis machining in one, through continuous research and development, HAWK SPEED series can be maintained at high dynamic while maximizing the itinerary. By matching such as cooling units, the reference point of the clamping system, A63 HSK spindle can expand the scope of application, to achieve great flexibility.

Product description

Technical Parameters

Innovative HAWK SPEED 750 models set the three axis and five axis machining in one, through continuous research and development,

HAWK SPEED series can be maintained at high dynamic while maximizing the itinerary. By matching such as cooling units, the reference point of the clamping system,

A63 HSK spindle can expand the scope of application, to achieve great flexibility.

Each axle stroke: X/Y/Z 650/1100/500 mm
Table size:X/Y 850/1300 mm
Spacious working area, perfect quality of work piece, the latest high speed spindle

各軸行程/Stroke of each axle	X=650mm 、Y=1100mm 、Z=500mm
進給率/Feed rate	max 30m/min
加速度/Acceleration	max 15m/s2
工作臺夾裝臺面尺寸/Table size of table	X=850mm 、Y=650(1300)mm
工作臺最大承重/Maximum load bearing	每個工作臺2000kg Each work station2000kg
工作臺/Workbench	T型槽臺可裝載第四/第五軸上方/Type T tank can be loaded on top of fourth / Fifth
T型槽/T type groove	5x18H12（每個工作臺） 5x18H12(Each work station)
主軸鼻端到工作臺距離最小/最大/Spindle nose to the operating table from the minimum / maximum	60/560mm
接入電源功率/Power of access	32KVA
高頻主軸轉速（可選）/High frequency spindle speed (optional)	HSK E40：1-42000U/min HSK E50：1-36000U/min HSK A63：1-24000U/min
主軸功率/Spindle power	15KW/17KW/22KW
刀庫（可選）/Tool magazine (optional)	40/72positions（HSK E40） 32/56positions（HSK E50） 40/24positions（HSK A63）
迷你油霧潤滑/Mini oil mist lubrication	包括/Include
數控系統/Numerical control system	Andron 3060/windows XP觸摸屏、PC-NC/雙處理器，電子手輪遠程控制 3060/windows XP Andron touch screen, PC-NC/ dual processor, electronic hand wheel remote control
驅動類型/Drive type	滾珠絲杠主軸、直連交流伺服電動機、線性測量系統（海德漢）/Screw spindle, direct measurement system of AC servo motor, linear ball (Heidenhain)
占地面積/Area covered	3520x2170mm HIGH=2850mm
機床總重量/Total machine tool	12700kg
選配/Matching	擺動圓臺：A軸+20度/-60度、 C軸60U/min 、工件重量：250kg Swing round: A axis -120 degrees /+60 and C axis torque motor 60U/min, workpiece weight: 250kg
更多選配/More matching	激光對刀、自動刀具清洗站、紅外線探頭、三維檢測功能、-在夾狀態測量、石墨吸收裝置、油霧吸收裝置、混濕工、切屑傳送鏈、錯誤信息短信提示、自動化準備 Laser tool setting, automatic tool cleaning station, infrared probe, 3D detection function, in clamping state measurement, graphite absorption device, oil fog absorbing device, wet mixing industry and trade, cutting chip conveyor chain, error messages, SMS tips, automation is ready to

Product Center

SPEED HAWK 750

Product description

Technical Parameters